Trabiss touchprobe ATP-100
Trabiss Touchprobe ATP-100 is a compact touchprobe with steel stylus. The 5-way trigger ensures an accurate measurement in X, Y and Z direction.
This touchprobe ATP-100 is particularly suitable as a combination with our Trabiss digital readout TDR-400. Can be used for conventional milling machines and CMMs (coordinate measuring machines).
You need to calibrate (align) the touch probe before you start using the touchprobe!
- Black anodised aluminium and stainless steel cylindrical shaft (Ø 6 mm)
- LED indication touch (green / red)
- Modular construction
- Protected against dust and (cooling) liquid
- Touchprobe is designed with normally closed internal contacts
- Shielded cable with USB connector for easy connection
- Every touch probe has been tested before shipping
- Concentric calibration 4 sets of screws with Allen wrench
- Optically calibrated before shipment.
- Metal stylus with 2 mm ball
Touch directions | ±X, ±Y, ±Z |
Repeat accuracy | < 0.01 mm |
Trigger power | Axial= 5N, Radial=1N |
Weight | 80 g |
Maximum Stylus Results | Radial – 15 degrees
Axial – 3 mm |
Dimensions | Ø 33 mm, H 20,5 mm, Shaft 20 mm |
Standard cable length | 2 metres |
Contact | NPN open, 5-24V |
Shaft diameter
Stylus ball |
6 mm (+- 0.004 mm)
2mm (+- 0.003mm) |