Linear magnet encoder MLC 420
Linear magnet encoder MLC 420 is for measurements up to 2.000mm,
it can be used to achieve the best performance in high speed and vibrating environments. Special mounting points and design reduce the most mistakes that can occur due to temperature changes. Special measures have been taken against the vibrations caused by the machine. Thanks to its ergonomic design, the cable output does not interfere with the ruler and works in perfect stability.
The direction of the ruler can be easily changed by the user.
Properties:
- Incremental magnet encoder Output A, B, Z, / A, / B, / Z
- Portable Reference Point
- Stroke Values up to 2,000 mm
- Perfect Retention System
- High Stability
- IP67 Protection Class
- Easy Installation
- Cable length up to 50 meters
- Same Ruler Available Right or Left
- Delem, Cybelec and ESA Compatible with Devices
Specificaties:
Resolution | 5µm, 10µm, 25µm, 62.5µm (or other) |
Output Type | Push-Pull or TTL RS422 Line Driver |
Output Signals | A, /A, B, /B, Z, /Z |
Input Current | Nominal 50 mA |
Output Current | 70 mA (For Every Channel) |
Supply Voltage | 10..30 VDC or 5 VDC |
Electrical Connection | Cable max. 50m |
Body Material | Aluminum |
Magnetic Tape | B1, B2 or B5 Nitril Rubber |
Operating Speed | 3 m/s |
Repeatability | ± 1 Pulse |
Operating Temperature | -25 to +85° |
Connection | Standard: 5 or 8 x 0,14 mm2 shielded cable Optional: Connection for Delem, Cybelec, ESA with D-Sub 9 Pin |
Protection Class | IP67 |