Photoelectric Rotary Encoder A58
Fotoelektrisch Rotary Encoder A58 is a photoelectric incremental encoder series,
which consists of 6 iterations – A58M, A58B, A58C, A58C2, A58C3 and A58D.
These encoders have the same mechanical and electrical properties.
Encoders produce up to 108,000 output pulses per revolution and can, depending on customer requirements,
have different versions of output signals: 11uApp, 1Vpp, TTL or HTL.
- ELECTRICAL DATA:
Version | A58-A 11 μApp | A58-AV 1 Vpp | A58-F TTL; HTL |
Supply voltage | +5 V ± 5% | +5 V ± 5% | +5 V ± 5%; +(10 tot 30) V |
Max. supply current (without load) | 80 mA | 120 mA | 120 mA |
Light source | LED | LED | LED |
Incremental signals | Two sinusoidal I1 and I2 Amplitude at 1 kΩ load: – I1 = 7 – 16 µA – I2 = 7 – 16 µA |
Differential sine +A / -A and +B / -B Amplitude at 120 kΩ load: – A = 0.6 – 1.2 V – B = 0.6 – 1.2 V |
Differential square-wave U1 / U1 and U2 / U2. Signal levels at 20 mA load current: – low (logic “0”) ≤ 0.5 V at Up =± 5V – low (logic “0”) ≤ 1.5 V at Up = 10 to 30 V – high (logic “1”) ≥ 2.4 V at Up =±5V – high (logic “1”) ≥ (Up – 2)V at Up = 10 to 30 V |
Reference signal | One quasi-triangular I0 peek per revolution. Signal magnitude at 1 kW load: – I0 = 2 – 8 µA (usable component) |
One quasi-triangular +R and its complementary -R per revolution. Signals magnitude at 120 W load: – R = 0.2 – 0.8 V (usable component |
One differential square-wave U0 / U0 per revolution. Signal levels at 20 mA load current: – low (logic “0”) < 0.5 V at Up =± 5V – low (logic “0”) < 1.5 V at Up = 10 to 30 V – high (logic “1”) > 2.4 V at Up =±5V – high (logic “1”) > (Up – 2)V at Up = 10 to 30 V |
Maximum operating frequency | (-3 dB) > 160 kHz | (-3 dB) > 160 kHz | (160 x k) kHz,k-interpolatiefactor |
Direction of signals | I2 lags I1 for clockwise rotation (viewed from shaft side) | + B lags + A in clockwise rotation (viewed from shaft side) | U2 lags with U1 in clockwise rotation (viewed from shaft side) |
Maximum rise and fall time | – | – | < 0,5 μs |
Standard cable length | 1 m; without connector | 1 m; without connector | 1 m; without connector |
Maximum cable length | 5 m | 25 m | 25 m |
MECHANICAL DATA:
Line number on disc (z) | 100; 250; 500; 600; 800; 1000; 1024; 1125; 1250; 1500; 2000; 2048; 2500; 3000; 3600; 4000; 5000; 9000; 10800 |
Number of output pulses per revolution | 100-108000 |
Maximale as snelheid | 12000 rpm |
Maximum shaft load |
axial: 10 N
|
Accuracy (T1-period lines on disc in arc. sec) | ± 0.1T1 arc. sec |
Starting torque at 20°C | ≤ 0.01 Nm |
Rotor moment of inertia | < 15 gcm² |
Protection (IEC 529) | IP64 |
Maximum weight without cable | 0,25 kg |
Operating temperature | -10…+70°C |
Storage temperature | -30…+80°C |
Maximum humidity (non-condensing) | 98 % |
Permissible vibration (55 to 2000 Hz) | ≤ 100 m/s² |
Permissible shock (11 ms) | ≤ 1000 m/s² |