FNC ASM80H Series Absolute SSI Encoder
FNC ASM80H Series Absolute SSI Encoder main characteristics of encoder single- or multiturn / SSI – bite,
magnetic detection, the magnetic resolution of a single rotation of 18 bits, bits 0-24 Multiturn,
a through hole for the shaft, constant continuity control code,
extreme resistance to shock and vibration, the electronic encoder reset.
- Encoder single – or multiturn / SSI – BISS
- Magnetic Sensing
- Magnetic single turn resolution: 18 bit
- Multi-turn 0…24 bit
- Through Hollow Shaft
- Permanent check of code continuity
- Extreme resistance to shock and vibration
- Encoder with electronic reset
Specifications:
Power supply | 8Vdc-30Vdc
5Vdc |
Protection | Output short circuit protection reverse polarity protection (except 5V version) |
Consumption w/o load | ≤100 mA |
Interface | SSI or BiSS |
Resolution | up to 18 bit |
Absolute accuracy | 0.1° |
Opto-electronic life | 100,000 (min) |
Code | Gray or binary |
Inputs | SSI differential clock Direction Electronic zero setting |
Output frequency | up to 2MHz (SSI)
up to 10MHz (BiSS) |
Output circuit | SSI data linedriver RS485 |
Interference immunity | DIN EN 61000-6-2 |
Interference emitted | DIN EN 61000-6-4 |
Approval | CE |
Dimension | ø80 mm |
Shaft loading | ≤20 N axial
≤40 N radial |
Protection DIN EN 60529 | IP 67 |
Operating speed | ≤10000 rpm |
Start torque | ≤0.001 Nm (IP 67) |
Material | Housing, Flange : Aluminium
Shaft : Stainless steel |
Shaft diameter | 25 mm |
Bearing life | 2×10⁹ rev. At 100% of the full nominal axle load (minimum) |
Operating temperature | -40…+90 °C
-40 °F …+180 °F |
Weight approx. | 250 G |